contact us
NSW (02) 9482 4444
QLD  (07) 3344 7611   




To purchase this item call us to find
your nearest authorised dealer


Description Complete remote Control: Part# MRC30
Replacement plastic case: Part# 242300
Replacement battery: RCB27A

(Not lithium coin type as stated in the owners manual)

A new remote has to be memorised into your security system for it to operate - this is called 'code learning'. The coding instructions can be found in your owners manual (which you can download from our website if yours is misplaced) or is detailed below.

  1. Disarm the system by remote or the override method.
  2. Open the door and press and hold the override switch.
  3. Turn the ignition off/on three times (leave ON 3rd time). Dash LED lights constantly to indicate learning mode.
  4. Press any button on the 1st remote. Dash LED will flash 3 times to confirm learning
  5. Press any button on the 2nd remote. Dash LED will flash 3 times to confirm learning.
  6. Turn the ignition OFF and release the override switch to complete the learning.

If no remote button is pressed within 10 sec's of entering learning mode, the system will exit.This procedure can be repeated for up to 4 remotes. Learning just one remote erases all previous. All existing remotes must be learnt at the same time.